Basic check plots for weighting moudule QA Page 1

Data: Only Juliet + weighting-module, for this check, no detector simulations.

65deg < nadir < 75deg, azimuth 2 pi, 9000 events (5 < log(E [GeV]) < 13) + 10000 events (8 < log(E [GeV]) < 13)

Plots to check make sure JULIeT and weighting-module is working as expected:

Red: 9000 events (5 < log(E [GeV]) < 13)
Black: 10000 events (8 < log(E [GeV]) < 13)

Primary Energy Log Log
Primary Azimuth
Primary CosTheta
Juliet Differential Flux Log vs. Primary Energy Log
Juliet Propagation Matrix Neutrino Flux vs. Primary Energy Log (comparison with direct output from JULIeT)
Highest Energy Cascade Energy Log vs. Primary Energy Log
Highest Energy Cascade Position X and Y
Highest Energy Cascade Position Z

Primary Energy Log
Primary Azimuth
Primary CosTheta
Juliet Propagation Flux Log vs. Primary Energy Log	Similar plot from the original Juliet
Juliet Primary Flux Matrix Log vs. Primary Energy Log
Highest Energy Cascade Energy Log vs. Primary Energy Log
Highest Energy Cascade Position X and Y
Highest Energy Cascade Position Z